Self Fusing Silicone Tape Made In USA X TAPE 10' Yellow Roll

tape The world’s strongest tape Specifications, Performance & Properties Electrical & Mechanical Specifications Test Method Typical Properties Operating Temperature Ranges: Continuous: Performance -45°C to 200°C (-50°F to 400°F) -65°C to 260°C (-80°F to 500°F) 1.2 .03 55 5 700 psi min. 300% min 60ppi min. 2 lbs. Min. 3 in. min. -54°C (-65°F) 5% max. 400Vpm min. 2.95 < 0.0004 1 x 1013 OHMS/cm min. Intermittent: Specific Gravity       ASTM D792 Hardness, Durometer, Shore A Room-cured – 24 Hours: Tensile Strength Elongation Tear Strength Bond Strength Adhesion, unwind Cold Brittle Point Water Absorption, by weight Dielectric Strength Dielectric Constant, 1kH3 Dissipation Factor, 1kH3 Volume Resistivity ASTM D2240 ASTM D412 ASTM D412 ASTM D624, Die B MIL-I-46852 ASTM D2148 ASTM D2137 Fed. Std. 601, Meth. 6251 ASTM D149 ASTM D150 ASTM D150 ASTM D257 Relation and Compliance to Industry Standards • A-A-59163: Which supercedes MIL-I-46852C • CPSIA: Consumer Product Safety Improvement Act • PROP 65: The Safe Drinking Water and Toxic Enforcement Act of 1986 • Class H Insulator – National Electrical Manufacturers Association (NEMA) • RoHS: Restriction of Hazardous Substances Directive 2022/95/EC • REACH: Registration, Evaluation, Authorization and Restriction of Chemicals (EU Regulation) • Flammability Testing: Per CPSC’s ASTM F963-08 The Ultimate Insulating Wrap Product Line is UL Listed for use at not more than 600 V and at not more than 80°C (176°F). General Performance Properties Moisture Resistance •      Excellent      UV Resistance •     Excellent Electrical Insulation • Resilience •     Excellent    Corrosion Prevention •   Excellent Excellent Excellent Ozone Resistance • Excellent High Temperatures • Flame Resistance •    Good    Acid Resistance •   Good-Fair Solvent Resistance • Good Good-Fair Abrasion Resistance Tear Resistance • • Good Hydrocarbon     Resistance    Good Oil Resistance • • Good-Fair Warranty: Xape is warranted against defects in material and workmanship when used for the purposes intended, under normal conditions. The warranty applies to product only and does not apply to damages arising from use of the warranted product. The above values are typical performance data of silicone rubber tape and are not intended to be used as design data.