￼Xtape The worlds strongest tape
Specifications, Performance & Properties
￼￼Electrical & Mechanical Specifications
Operating Temperature Ranges: Continuous:
-45C to 200C (-50F to 400F) -65C to 260C (-80F to 500F) 1.2 .03
700 psi min. 300% min
2 lbs. Min.
3 in. min.
5% max. 400Vpm min.
1 x 1013 OHMS/cm min.
Specific Gravity ￼ ￼ ￼ ￼ ￼ ￼ ASTM D792
￼￼￼￼Hardness, Durometer, Shore A Room-cured 24 Hours:
Cold Brittle Point
Water Absorption, by weight Dielectric Strength
Dielectric Constant, 1kH3 Dissipation Factor, 1kH3 Volume Resistivity
ASTM D624, Die B MIL-I-46852
Fed. Std. 601, Meth. 6251 ASTM D149
Relation and Compliance to Industry Standards
￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼￼ A-A-59163: Which supercedes MIL-I-46852C
CPSIA: Consumer Product Safety Improvement Act
PROP 65: The Safe Drinking Water and Toxic Enforcement Act of 1986
Class H Insulator National Electrical Manufacturers Association (NEMA)
RoHS: Restriction of Hazardous Substances Directive 2022/95/EC
REACH: Registration, Evaluation, Authorization and Restriction of Chemicals (EU Regulation) Flammability Testing: Per CPSCs ASTM F963-08
The Ultimate Insulating Wrap Product Line is UL Listed for use at not more than 600 V and at not more than 80C (176F).
General Performance Properties
Moisture Resistance ￼ ￼ ￼ ￼ ￼ Excellent ￼ ￼ ￼ ￼ ￼ UV Resistance ￼ ￼ ￼ ￼ Excellent
Resilience ￼ ￼ ￼ ￼ Excellent ￼ ￼ ￼ Corrosion Prevention ￼ ￼ Excellent
Flame Resistance ￼ ￼ ￼ Good ￼ ￼ ￼ Acid Resistance ￼ ￼ Good-Fair
￼￼￼￼Abrasion Resistance Tear Resistance
Good Hydrocarbon ￼ ￼ ￼ ￼ Resistance ￼ ￼ ￼
￼￼￼￼￼￼Warranty: X-tape is warranted against defects in material and workmanship when used for the purposes intended, under normal conditions. The warranty applies to product only and does not apply to damages arising from use of the warranted product. The above values are typical performance data of silicone rubber tape and are not intended to be used as design data.
X Tape The Best Self Fusing Tape Made in the USA